ZBoost PRO Spécifications télécharger pdf (Page 13)

zBoost

PRO 3500 ZBC3500 Manual

Setting Up Your zBoost Signal Booster

FIRST: Mount the External Antenna

Choosing the best location for the External Antenna provides

the best performance and the largest area of improved signal.

Choose a location for the External Antenna using your cell

phone to determine the area of strongest signal - typically

found outside, above the rooine or in an attic. The antenna

must also remain at least 3 feet from any metal objects such

as pipes, metal siding, A/C unit etc. and at lease 15 vertical

feet above the Panel Antenna.

Identify the best location for attachment of the mounting

bracket – such as an attic cross or main beam. Secure the

mounting bracket at the highest possible point.

Position the mounting bracket such that the External Antenna

will be vertical and attach the External Antenna. See “Antenna Bracket Assembly” below for more

information.

Antenna Bracket Assembly

IMPORTANT: Incorrectly mounting the External Antenna to the

mounting bracket (see gure A) will impede performance. Ensure that

the External Antenna is properly positioned in the mounting bracket as

pictured below.

To mount External Antenna to a pole: Attach antenna to pole

bracket as pictured. Use U-Bolt to secure bracket to pole and fasten.

DO NOT mount to a metal pole.

To mount External Antenna to a at surface: Attach antenna to

pole bracket as pictured. Secure bracket to desired surface using

provided screws. Use of the Saddle and U-Bolt are not necessary for

this option.

SECOND: Place the zBoost Base Unit where you want to create a Cell Zone

Connect the Indoor Antenna to the Base Unit and place it where you need signal. For the widest

possible signal area, position the Base Unit near the middle of a room. You may also mount it on an

interior wall by rst removing the bracket, screwing the bracket to a wall (screws not included), then

snapping the Base Unit back in place keeping the Indoor Antenna vertical. The Base Unit uses an

omni-directional Indoor Antenna that delivers signal in a circular pattern around the antenna.

The zBoost PRO 3500 requires at least 15 feet of vertical separation between the Base Unit

and the External Antenna. Generally, increasing this distance (up to 40 feet) will increase the

performance and decreasing the distance will limit the performance.

Keep the Base Unit off the oor and at least 2 feet away from other cords, metal objects or other

wireless devices such as wireless routers or wireless access points. The zBoost PRO 3500

performs best when there are no obstructions between the zBoost Base Unit and your mobile

device.

15 ft.

of vertical

separation

Minimum PerformanceMaximum Performance

Pole Bracket

Saddle

U-Bolt

Figure A

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

ZBoost PRO Spécifications Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs de signaux cellulaires ZBoost PRO